VESA 100 × 100 Mount Size
VESA 100 × 100 means the four mounting holes sit 100 mm (3.94 in) apart across and 100 mm (3.94 in) up and down. It is common on most monitors and small TVs, up to about 32 in.
- Across
- 100 mm 3.94 in
- Up and down
- 100 mm 3.94 in
- Corner to corner
- 141 mm 5.57 in
- Typical screws
- M4
How do I check that my screen is 100 × 100?
Measure between the centers of two holes across the back, then between two holes up and down. Both should read 100 mm, give or take a millimeter or two.
Which TVs and monitors use VESA 100 × 100?
Most monitors and small TVs, up to about 32 in, as a typical range. Each TV and monitor size page lists the exact pattern for popular models, and your manual is the final word.
Screens a size down often use 75 × 75, and bigger ones move to 200 × 100.
Which models in our list use VESA 100 × 100?
In our list, fifty-three monitors from 20 to 49 in and five TVs from 24 to 40 in use 100 × 100. That is all but five of the monitors we list, and the rest use 75 × 75 and 200 × 100. The biggest monitors on it are 49 in, such as the Dell U4924DW and ASUS ROG Swift OLED PG49WCD.
The biggest TV on it is the 40 in TCL 40Q3K. At 20, 24, 25, 32, 40, 43 and 45 in, some models use a different pattern, so check yours before you buy a mount.
Shop VESA 100 × 100 mounts and arms
Affiliate linksMore questions about VESA 100 × 100
Is VESA 100 the same as 100x100?
Yes. VESA 100 is the short name for holes 100 mm apart both across and up and down.
Can a 100 × 100 mount hold a 75 × 75 screen?
Only if the mount plate also has 75 × 75 holes. Many plates are drilled for more than one pattern, so check the listing.
How much weight can a 100 × 100 mount hold?
It depends on the mount, not the pattern. Check the weight rating of the mount against the weight of your screen without its stand.
How long should M4 screws be?
It depends on how deep the holes are and how thick the mount plate is. Use the length in your manual, and stop if a screw gets hard to turn.
What other VESA sizes are there?
How we measure
VESA patterns are written across × up and down, in millimeters, measured between hole centers. Inch values are millimeters ÷ 25.4, and corner to corner is √(across² + up and down²).